45
Accessories
Mounting
The flash arm base is used to fix the flash arm system to your housing. Tighten this
part carefully with the fixation screw at the housing’s T-piece. The best and quickest
system to mount your arm is with released joints. Afterwards adjust the flash system
to your working position and set it by tightening the fixation levers.
Feature
If your KIPP-fixation levers stop at a particular position, you can easily adjust them
by pulling them upwards, changing the position and pushing them back in.
How to use
Always pay attention to a securely fixed flash arm system when going in and out of the
water so that your flash system our housing will not be damaged by bumping together.
In the water, adjust the system to your desired retention force. In strong currents, we
suggest you increase it by tightening the joints to avoid a wrong placement of your
flash system.
Telescope Extension
This extension enables you to smoothly lengthen the flash arm to your personal
preference. By turning the pipes, you can adjust it to the position you like. This system
is meant to be extended outside of the water, as it is hard to fixate the flash in a certain
position underwater. In case sand or mud enters the pipes, you can easily clean them
by removing the plastic screw and opening the extension.
