20
When the flash delivers at full power, but less than the camera requires, the user is
advised of a possible underexposure with an audible alarm and 1/1 blinking on the
display.
Feature
Knowing the delivered power allows you to identify whether it is still possible to
further open or close the aperture.
2. MAN - Manual Mode
Set the power switch (1) to MAN and the ready light LED (5) will be
GREEN
. The
power of the flash is selected with the rotary switch (2) and the display indicates this
power in 14 aperture steps and half steps: 1/1 for full power 1/1 -5 for half steps less,
1/2 for half power, 1/2 -5 for a half step less, down to 1/64 -5.
Feature
The rotary switch (2) with accurately defined steps, combined with a clear reading
on the display allows for a fast and accurate power setup.
3. HSS - High Speed Synchronization
HSS
is available in
TTL
and in
MAN
mode and will operate at up to 1/8000 camera
shutter speed. You are able to set this mode only if the camera is active and connected
to the strobe. When HSS is activated, the display shows
FP
.
On
NIKON
cameras, the HSS mode is automatically activated by the camera when
the shutter speed is set over 1/250. The display shows
FP
.
On
CANON
cameras, HSS can be activated by pressing the push button (3)
2
times
for more than 2s. The display shows
FP
.
Shooting Mode – Cable
