7
The SEAFLASH 160
digital
and SEAFLASH 160
offshore
are different in the maximum
rate of depth only. The standard depth rate is -80 m / -240 ft. The offshore depth rate
is -200 m / -600 ft. All electronic features and the accessories are the same. In the
further manual both strobes are called SEAFLASH 160
digital
.
SEAFLASH 160
digital
SEAFLASH 160
offshore
The SEAFLASH 160
digital
is fully controlled by a microprocessor. Some of the
significant advantages of using these processors are the possibility of managing digital
communication on a serial bus with a digital camera and easily updating the firmware
through a USB connection.
Thanks to the special electronics, the SEAFLASH 160
digital
is equipped with many
special features. These features can be programmed individually and adapted to your
needs. In order to make it easier for you to operate the strobe right from the start, the
device is delivered with proven basic settings (default).
An additional advantage is the ability to rotate a graphical digital display (4) which is
the perfect interface between the user and the flash. The bright OLED display offers a
high contrast ratio for an improved visibility.
This flash unit works in TTL and manual mode with Nikon and Canon cameras.
Cameras with fiber optical connection as well as a slave flash, triggered by an
integrated optical sensor. Fast synchronization FS up to 1/8000 and rear curtain
operation are also a standard feature.
General Description
