6
• Before using the flash with a camera brand not listed in this manual contact
SEACAM.
• Never connect a power supply or battery charger to the synchro connection of the
unit or to the USB Adapter.
• Do not remove the battery pack from the battery container if the unit is still switched
on.
• Never use this flash together with a different flash brand. Enquire about its compa-
tibility and connections especially when using electrical connections. Not following
this recommendation can result a damage of the unit or the camera used.
• Never shoot the flash directly into the lens of a digital camera. This can damage the
camera picture sensor.
• Always prevent water or moisture from entering into the battery container, to the
batteries, sockets and plugs. Close the battery carefully container before using the
flash underwater.
• Never exceed the maximum depth rate. This will cause a structural damage of the
unit.
• Make sure that the thread of the ball adapter is no longer than 7 mm. Longer
threads can cause massive damage to the housing if force is used.
• Always use the flash as instructed in this user manual. Not paying attention to the
recommendations of this user manual can cause damage to the unit or to the used
camera and excludes warranty claims.
Safety Instructions
