14
The removable SEAFLASH 160
digital
battery pack is located under the battery
compartment cap (7). To remove the cap, press the safety lock button (6) and turn
to the left. Close it by turning it to the right. When closing or opening, the battery
compartment cap will automatically be pushed in or pulled out from the container.
Always prevent water or moisture from entering into the battery container or to the
battery pack. Ensure you close the battery compartment (7) completely before using
the flash underwater.
IMPORTANT
Maintain / check the O-ring at the battery compartment cap (7)
always
when
opening. Clean and grease the sealing surface regularly. Close the battery
compartment cap (7) completely until you hear a
CLICK
sound.
Feature
The battery compartment is completely sealed. In case water enters due to an
incorrect battery compartment cap positioning or an O-ring failure, the electronic
will not be floated. Only the battery pack and battery contacts can be damaged.
Tip
When floating occurred, remove the battery pack immediately, rinse with fresh water
and dry the battery compartment completely. By using a spare battery, you can
continue shooting. Send the unit to a SEACAM service facility for a complete check
as soon as possible.
The battery fits only in one position. You can remove the battery pack by pulling up
the battery pull ring (18). When fitting in the battery pack, ensure that the battery
pull ring (18) is tilted down. The battery pack is made of special NiMH batteries. It is
equipped with a built-in electronic to make battery management easy, fast and safe.
By switching on the flash, the user can read the indication of the battery status on
the OLED display (4).
Battery Management and Maintenance
