Sea Recovery Aqua Mini 170, Руководство пользователя

Страница: 35 / 170

NUT
"O" RING
TUBING
SPACER
GRAB RING
4. Connect Brine Discharge line with the supplied 20 feet (6 meters) of 3/8” (9.5 mm) O.D. Brine Discharge Tubing
(refer to illustrations on the following page):
Inlet of to Outlet of
Discharge 3-way Clean/Rinse Valve [31] System Brine Discharge
Rinse/Clean Bucket or container Discharge 3-way Clean/Rinse Valve [31]
Thru Hull Discharge fitting [18] Discharge 3-way Clean/Rinse Valve [31]
5. Connect Product Water line with the supplied 30 feet (9.14 meters) of 1/4” (6.35 mm) O.D. nylon tubing (refer
to illustrations on the following page):
Inlet of to Outlet of
Charcoal Filter {22} Potable Product Water from System
U.V. Sterilizer [23] Charcoal Filter [22]
pH Neutralizing Filter U.V. Sterilizer [23]
Boats Potable Water Storage Tank pH Neutralizing Filter
UV Light Installation
The SP Series UV unit is shipped with the UV lamp, quartz sleeve, fittings, and O-rings and need to be assembled
before the UV unit can be used.
1. Install the UV unit in a sheltered, well ventilated area.
2. Install the UV unit as close as possible to the point-of-use to avoid potential contamination discharge from pipes,
fittings, etc.
3. The UV unit should be mounted on stable support to avoid straining or warping. Allow sufficient clearance
around the unit for servicing.
4. Verify the location is free from vibration.
5. All UV units are rated for maximum operating pressure at 50psig (8.24 bar).
33
System Installation Precautions and Information