Sea Recovery Aqua Mini 170, Руководство пользователя

Страница: 34 / 170

WRONG
BEND TOO TIGHT
NO SLACK
CORRECT
HOSE EXITS FITTING
STRAIGHT FOR
SEVERAL INCHES
RELAXED BEND
WITH SLACK
1. Connect all inlet feed lines with the supplied 20 feet (6 meters) of 1/2” (12.7 mm) I.D. Inlet Suction Hose:
Inlet of to Outlet of
Sea Strainer [3] Sea Cock Valve [2]
Inlet 3-Way Clean/Rinse Valve [30] Sea Strainer [3]
Rinse/Clean bucket or container Inlet 3-way Clean/Rinse Valve [30]
Booster Pump [4] Inlet 3-way Clean/Rinse Valve [30]
Fresh Water Flush Check Valve [26] Booster Pump [4]
Plankton Filter [5] Fresh Water Flush Check Valve [26]
Prefilter [6] Plankton Filter [5]
High Pressure Pump [11] Prefilter [6]
Tube Fitting Connections Assembly [24]
1. Cut tube end square and clean.
2. Loosen nut on fitting three turns.
3. Insert tube into fitting until it bottoms. Loosen nut completely and remove tube with attached parts from body.
Check to ensure that the O-Ring is seated onto the tube under the spacer (and not pinched into the body).
Insert tube with attached parts into the body and tighten nut finger tight.
Sea Recovery Aqua Mini 170, 350, 550 and 750 32