Sea Recovery Aqua Mini 170, Руководство пользователя

Страница: 68 / 170

1. Remove the front cover from the system controller to access the Main Terminal Strip and Printed Circuit Board.
REFER TO APPROPRIATE WIRING DIAGRAM ON THE FOLLOWING PAGES OF THIS SECTION.
2. Main Power: Insert main power cable through strain, see insert below. Connect main power cable leads to the
system, see appropriate wiring diagram on following pages of this section.
3. Booster Pump: Insert Booster Pump power cable through strain relief, see insert below. Connect Booster Pump
power cable leads to the system, see appropriate wiring diagram on following pages of this section.
4. Fresh Water Flush Solenoid Valve: Remove strain relief hold plug from the side of the control box, see insert
below, and attach the Fresh Water Flush Solenoid Valve strain relief supplied with the Fresh Water Flush
Accessory. Insert power cable through the strain relief. Connect Fresh Water Flush Solenoid Valve power cable
leads to the system, see appropriate wiring diagram on following pages of this section.
5. U.V. Sterilizer: Remove strain relief hold plug from the side of the control box, see insert below, and attach the
U.V. Sterilizer strain relief supplied with the U.V. Sterilizer Accessory. Insert power cable through strain relief.
Connect U.V. Sterilizer power cable leads to the system, see appropriate wiring diagram on following pages of
this section.
6. Remote Control: Remove strain relief hold plug from the side of the control box, see insert below, and attach
the Remote Control strain relief supplied with the Remote Control Accessory. Insert power cable through strain.
Connect Remote Control power cable leads to the system, see appropriate wiring diagram on following pages
of this section.
Motor Rotation
Refer to Booster Pump and High Pressure Pump markings to determine proper rotation.
A.C. Systems: Refer to Booster Pump Electric Motor nameplate and High Pressure Pump Electric Motor nameplate
for wiring connections and rotation notations.
DC Systems: The High Pressure Pump DC Electric Motor and Booster Pump DC Electric Motor rotation are polarity
sensitive. If rotation is incorrect, check incoming polarity and individual motor wiring. Jog the motor by pressing
the Start Switch and then quickly thereafter pressing the Stop switch.
Recommended Wire Sizes
Caution: DO NOT USE ROMEX TYPE SOLID CORE WIRE. SOLID CORE WIRE CAN EASILY BREAK
AND WILL NOT FIT OR SEAL INTO THE SUPPLIED STRAIN RELIEFS. USE ROUND JACKETED
STRANDED WIRE PREFERABLY WITH AN OUTER JACKET DESIGNATION OF SJO OR SIMILAR
COMPATIBLE WITH MARINE USE AND AN OILY ENVIRONMENT. FOR DC OPERATION FINE STRAND
WIRE, SIMILAR TO BATTERY CABLE, IS PREFERRED FOR MINIMAL RESISTANCE AND MINIMAL
VOLTAGE DROP.
Wire Size Cross Reference American Wire Gauge (AWG) vs. Metric Wire Sizes
Square Millimeters (mm2) Diameter Millimeters Square Inch (In2) Diameter Inch AWG
107.1649 11.6840 0.1661 0.4600 0000
84.9683 10.4038 0.1317 0.4096 000
67.3980 9.2659 0.1045 0.3648 00
53.4609 8.2525 0.0829 0.3249 0
42.3871 7.3482 0.0657 0.2893 1
33.6069 6.5430 0.0521 0.2576 2
26.6516 5.8268 0.0413 0.2294 3
21.1385 5.1892 0.0328 0.2043 4
13.2913 4.1148 0.0206 0.1620 6
8.3626 3.2639 0.0130 0.1285 8
5.2588 2.5883 0.0082 0.1019 10
Sea Recovery Aqua Mini 170, 350, 550 and 750 66