Sea Ray 44 Sedan Bridge, Руководство пользователя

Страница: 190 / 218

44 Sedan Bridge ( 455 Sedan Bridge )
7.18
S
ECTION
7 • A
CCESSORIES AND
O
PTIONS
A. C
ARE
& M
AINTENANCE
Care and maintenance instructions have been
provided by the canvas manufacturer for the canvas
used on your Sea Ray
®
. The information can be
found in the Owner's Manual Packet.
By following the provided instructions, your canvas
set will give you protection from the elements and
comfort that you expect. Most of all, the instructions
provide you with installation and removal
procedures that will simplify the task.
Components of your canvas set consist of zipper
tracks and snaps. These components can be found
in the parts manual located in the Owner’s Manual
Packet.
B. S
TORAGE
:
• Do not fold or store any of the canvas set pieces
while wet. All canvas should be rolled or folded
when dry and stored in a clean, dry place.
• For clear vinyl pieces, rolling or laying down flat
are the recommended methods for storage. The
clear vinyl should never be folded or creased
as cracking will result. To protect the clear vinyl
from rubbing against itself while rolled or stored
flat, place a piece of very soft, nonabrasive cloth
between the pieces, or rolled up in it. If the
surface of your clear vinyl becomes scratched,
the canvas manufacturer has provided a
canvas care sheet in your Owner’s Manual
Packet.
C. I
NSTALLATION
T
IPS
:
• The zippers attached on the hardtop and cockpit
overhead are mounted on a zipper track. Once
installed, do not remove these zippers or zipper
tracks.
• When attaching any of the pieces of the canvas
set, attach the top edges first and zip the zippers
only partially. This helps to hold the piece in
place and relieves tension, helping the other
sides to zip or snap easier. After all of the sides
of the piece are secure, finish zipping the top of
each piece. This will ensure a tight fit.
REFER TO OWNER’S MANUAL PACKET FOR
INSTRUCTIONS AND WARRANTY INFORMATION.