Sea Ray 270 Select EX, Руководство пользователя

Страница: 54 / 126

3.8
S
ECTION
3 • U
SING
Y
OUR
B
OAT
270 Select EX
B. T
O
O
PERATE
F
ROM THE
B
OW
:
• Make sure that the safety lanyard is removed
from the anchor chain.
• Turn the WINDLASS MAIN switch ON at the
control station.
• Lift protective cap on foot switches and depress
UP or DOWN switch for the desired result.
C. T
O
O
PERATE
M
ANUALLY
:
• Make sure that the safety lanyard (see Fig. 3.7.3)
is removed from the anchor chain.
• Insert the emergency handle into the clutch nut
(see fig 3.7.4)
• Turn handle clockwise to retrieve anchor.
Make sure that the power is off before any work is
performed on the windlass.
! DANGER
D. M
AINTENANCE
:
• Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of
grease.
It is recommended at least once a year to
disassemble the windlass (Fig. 3.8.1) and remove
any residue buildup.
• Using the emergency handle, unscrew the
clutch nut by turning the handle
counterclockwise.
• Remove the drum, upper cone, chain wheel and
lower cone.
• Wash down with fresh water and remove any
residue.
• Coat contact surfaces with a light film of
lubricant.
• Reassemble the unit and tighten clutch by
turning the handle clockwise.
REFER TO WINDLASS OPERATOR’S MANUAL IN
YOUR OWNER’S PACKET FOR DETAILED
OPERATING AND MAINTENANCE INSTRUCTIONS.
W
INDLASS
(M
AINTENANCE
P
ROFILE
)
(F
IG
. 3.8.1)
EMERGENCY HANDLE
CLUTCH NUT
DRUM
UPPER CONE
CHAIN PULLEY
LOWER CONE