Sea Ray 270 Select EX, Руководство пользователя

Страница: 43 / 126

2.13
S
ECTION
2 • G
ENERAL
B
OAT
A
RRANGEMENT
270 Select EX
Always check oil pressure and water gauges while
moving, even if your engine has an alarm.
Shut down engine immediately if gauges are not in
normal ranges, or alarm sounds.
Do not restart engine until problems are corrected.
! CAUTION
E. E
NGINE
A
LARM
S
YSTEM
The engine Operator’s Manual will tell you if your
engine is equipped with an audible alarm and how
to use it.
The alarm indicates a problem with engine water
temperature, oil pressure and/or stern drive oil level.
D. T
RAILER
S
WITCH
The trailer switch (power trim switch) (Fig. 2.13.1)
is not to be confused with the power trim function.
The trailer switch is to be used only when the engine
is OFF.
The trailer switch allows the drive unit to be raised
for trailering, beaching and launching. To operate,
press and hold the trailer switch until the drive unit
reaches the end of upward travel. The mechanism
that raises the lower unit will stop operating at the
end of the upward travel. To bring the drive unit down
into boating position, push the power trim switch
down.
P
OWER
T
RIM
S
WITCHES
(O
PTIONAL
)
(F
IG
. 2.13.1)
POWER TRIM
SWITCH
If you raise the stern drive up too far while you are
on plane, you could cause a loss of speed and
power due to condition called propeller “ventilation.”
If this happens, there will be a sudden increase in
engine RPM and loss of speed. Do not let this
condition exist. Immediately reduce your engine
RPM and trim the outdrives DOWN slightly until
engine slows down and you regain forward speed.
The trim gauge indicates the position of the stern
drive relative to the transom.
REFER TO YOUR ENGINE OPERATOR’S
MANUAL FOR PROPER TRIM GAUGE
SETTING.
9. I
MPORTANT
G
AUGES
A. S
MART
C
RAFT
™ G
AUGE
S
YSTEM
Your boat is equipped with the SmartCraft
TM
instrumentation system. The SmartCraft
TM
system
consists of a smart tachometer with a display
screen.
The SmartCraft
TM
system provides a wide range of
engine, boat systems and environmental
information to the boat operator to help make your
time on the water more enjoyable by providing
accurate systems information in one convenient
location, right at the helm. Below is a list of features
the SmartCraft
TM
system offers.
Refer to the SmartCraft
TM
owner’s manual in the
owner’s packet for all SmartCraft
TM
operating
instructions.
S
MART
C
RAFT
S
YSTEM
T
ACH
(F
IG
. 2.13.2)