65
Shifter System
Check that reverse gate moves freely.
With shift lever in forward position, the
gates must be in upward position and
locked. With the shift lever in neutral
position, gates must be in middle po-
sition. With shift lever in reverse posi-
tion, gates must be in downward posi-
tion.
To verify the reverse gate lock, move
shifter to the FORWARD position.
Pull backwards on the starboard re-
verse gate.
The reverse gate lock is working if the
reverse gate stays in the up position.
CAUTION:
If the reverse gate does
not stay in the up position when the
shifter is at FORWARD, do not oper-
ate the boat further, see an autho-
rized Sea-Doo sport boat dealer.
Inlet Clearance System
See SPECIAL PROCEDURES section.
Safety Lanyard and Engine
Start/Stop Buttons
Ensure switches operate properly. Start
and stop each engine using each switch
individually.
Storage Compartment
Covers
Ensure they are closed and latched.
WARNING
Verify the reverse gate lock.
WARNING
If engines do not shut-off when
pushing engine start/stop buttons
or by disconnecting the safety lan-
yard from the DESS post, do not
operate the boat further, see an au-
thorized Sea-Doo sport boat deal-
er. Only start boat once all items
have been checked and operate
properly.
lmo2005_002a.book Page 65 Tuesday, July 6, 2004 3:44 PM
Содержание Speedster 200
