Sea-doo Speedster 200 Скачать руководство пользователя | Manualshive

Страница: 109 / 130

background image

109

The emission warranty covers damage to other engine components that is
caused by the failure of a warranted part.

The BRP

Operator's Guide

provided contains written instructions for the proper

maintenance and use of your sport boat. All emission warranty parts are warrant-
ed by BRP for the entire warranty period of the sport boat, unless the part is
scheduled for replacement as required maintenance in the

Operator's Guide

.

Emission warranty parts that are scheduled for replacement, as required mainte-
nance, are warranted by BRP for the period of time before the first scheduled
replacement date for that part. Emission warranty parts that are scheduled for
regular inspection, but not regular replacement, are warranted by BRP for the
entire warranty period of the sport boat. Any emission warranty part repaired or
replaced under the terms of this warranty statement is warranted by BRP for the
remainder of the warranty period of the original part. All parts replaced under this
limited warranty become the property of BRP.

Maintenance receipts and records should be transferred to each subsequent
owner of the sport boat.

Owner's Warranty Responsibilities

As the owner of a Sea-Doo sport boat equipped with a Rotax engine(s), you are
responsible for the performance of the required maintenance listed in your

Oper-

ator's Guide

. BRP recommends that you retain all receipts covering maintenance

on your Rotax engine, but BRP cannot deny warranty solely for the lack of receipts
or your failure to ensure the performance of all scheduled maintenance.

As the owner of a Sea-Doo sport boat equipped with a Rotax engine(s), you should
however be aware that BRP may deny you warranty coverage if your Rotax en-
gine(s) or a part has failed due to abuse, neglect, improper maintenance or unap-
proved modifications.

You are responsible for presenting your Rotax engine to an authorized BRP Dealer
as soon as a problem exists. The warranty repairs will be completed in a reason-
able amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities or
for the name and location of the nearest authorized BRP Dealer you should con-
tact the Customer Assistance Center at 1 (715) 848-4957.

© 2004 Bombardier Recreational Products Inc. All rights reserved.

® Registered trademark of Bombardier Recreational Products Inc. or its subsid-

iaries.

lmo2005_002a.book Page 109 Tuesday, July 6, 2004 3:44 PM

«
...
107
108
109
110
111
...
»

Содержание Speedster 200



































































































































Отзывы:

Нет отзывов

Похожие инструкции для Speedster 200

Бренд: COBIA Страницы: 24

Бренд: Bayliner Страницы: 40

Бренд: Quicksilver Страницы: 61

Бренд: Axopar Страницы: 39

Бренд: Everglades Страницы: 126

Бренд: Mercury Страницы: 37

Dynamic 250/260

Бренд: Mercury Страницы: 46

200 OptiMax DTS

Бренд: Mercury Страницы: 42

Бренд: Gumotex Страницы: 40

Бренд: Sailfish Страницы: 68

Бренд: Feathercraft Страницы: 21

Бренд: WAYFARER Страницы: 2

Бренд: Carolina Cat Страницы: 65

Бренд: Sea Eagle Boats Страницы: 17

Бренд: Sea Ray Boats Страницы: 30

Бренд: Sea Ray Boats Страницы: 30

Бренд: Sea Ray Boats Страницы: 26

Бренд: Sea Ray Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды