Operation Manual
SYSTEM
OCR-504 Multispectral Radiometer
SECTION
K - APPENDIX A
Figure 8 - HyperTerminal Connection Description
Enter a name for your new connection in the space provided. The name should
reflect the nature of the connections use. In this case, a good name would be
“COM1 Direct” or “COM2 Direct”, depending on which serial port you are using
on your computer. The word “Direct” indicates that you are making a direct
connection to the port. You do not need a modem for a direct connection. When
you have selected your connection name, press the OK button. This should
invoke the “Connect To” dialog box, as shown below.
Figure 9 - HyperTerminal Connect To dialog box
As your connection does not involve a modem, only the “Connect using:”
dropdown box is needed. Select a direct connection to your desired serial port
