SDT FS.LBX.001, Руководство пользователя, Страница: 13 / 52

LUBExpert User Manual
13/52
5. Getting Started
5.1. Have you Installed UAS3?
On-condition machinery lubrication starts with creating logical and manageable asset databases from
which routine greasing surveys evolve. Your LUBExpert kit includes Ultranalysis Suite (UAS3)
software. If you have not already installed UAS3 and the SDT device driver on your PC, you will need
to do that first. Everything you need resides on the USB drive delivered with your LUBExpert kit. The
installation process is simple enough however should you require installation assistance contact your
SDT authorized representative (or
support@sdtultrasound.com ).
5.2. Are UAS3 and LUBExpert up to date?
Before we get started, let’s make sure you’re working with the latest tools. SDT takes customer
feedback seriously and we continuously improve UAS3 and LUBExpert to ensure the best experience
possible. It is therefore a good idea, from time to time, to check for firmware and software updates.
While connected to the Internet, you can confirm that both your software and your hardware are at
the current update by clicking the “?” Tab in UAS 3.
1. Launch UAS3 from the desktop icon
or your program start menu.
2. UAS3 checks your software version
and advises you if new updates are
available.
3. Now let’s check the firmware on your
LUBExpert. Power up LUBExpert first, then
connect it to your PC with the supplied USB
cable. UAS3 queries the device version and
advises you if updates are available.
4. Follow the simple and intuitive prompts and don’t hesitate to contact us if you experience
difficulties