Operation & Maintenance Manual
──
LG968 /969Wheel Loader
60
△
!
WARNING
z
When adjusting the cab’s seat, park the machine in a safe
place and stop the engine.
z
Adjust the cab’s seat before starting operation or replacing
the operator.
z
Make sure that you can depress the brake pedal completely
when your back is against the seat backrest.
z
Weight Adjustment
Weight adjust handle is at the middle bottom of the seat. Turn the
handle A counter-clockwise, the rigid of shock absorption will go
down; turn the handle A clockwise, the rigid of shock absorption will
go up. The Operator can adjust handle A according to his weight
until feel comfortable.
z
Fore-and-Aft Adjustment
The handle is at the left bottom of the seat. Pull the handle B to adjust the seat forward or backward
until ideal position; it will be locked automatically after push it down.
z
Backrest Adjustment
Pull the backrest adjust handle C to push the backrest until to the proper angle, and then release
handle to lock the angle.
z
Height Adjustment
There are three weight positions, divided by three block position; the operator can adjust by himself
Hold the basement under the cushion, pull it steadily upward hard, the seat will be locked during
moving up if it hits the block position and you will hear the sound like “Ka Ta”, and then release your
hand, the seat will be locked at this position. If the seat is at the upper most position, pull the seat hard
upward once and then push it down, the seat will go down to the lower most position.
z
Head Pillow Height Adjustment
Pull the pillow hard upward or downward with your two hands holding it, and the height of pillow
will be adjusted
1.2.11 Safety Belt
Wear the safety belt if the safety belt is assembled during operation. Check the abrasion level and the
fastness. Replace it if possible.
Adjust the length of safety belt before using to ensure the effect and comfort. Move the lock-tongue
