Operation & Maintenance Manual
──
LG968 /969Wheel Loader
25
6.4 Don’t Get Close to Dangerous Environment
z
If the ejection of silencer toward flammable material,
or the vent-pipe is close to the flammable material
may cause fire. Pay attention to lipin, cotton, papers,
fade grass, chemical materials, and etc. or flammable
place.
6.5 Don’t Get Close to High Voltage Wire
Do not touch the aerial electric wire. Electroshock
may happen even get close to high voltage wire.
The crossing distance between loader and the electric
wire should be:
z
At least 2m (6.5ft) at low voltage condition
z
At least 4m (13ft) at 40KV high voltage condition
(electric wire is generally supported by fixed
insulator)
z
At least 6m (20ft) at 40KV high voltage condition (electric wire is generally supported by fixed
insulator)
To prevent accident, please do the following things:
z
The height distance between loader and the electric wire should be
At least 2m(6.5ft) at low voltage cases
At least 4m (13ft) at high voltage cases
z
Ask the electricity company first how to act according to the relevent rules when the machine
may touch the electricity cables.
z
Wear rubber shoes and rubber gloves. Lay a leather cushion on operator’s shoes. Be sure no
part of our body could touch the metal bottom.
z
Assign a signal warner, who can give the warnings when the machine get too close to electric
cables.
z
Never
leave the operator cab,
never
move, do not touch anything of machine until the people
who is on the ground cut off the electric once the machine touch the wire,
z
When operating near High-Voltage cables, make sure other persons are far from the machine.
