SCW Admiral Line Скачать руководство пользователя страница 74

Страница: 74 / 119

Select the camera and then select

Enable Shoulder Demarcation

Draw a virtual line on the screen to set the minimum width of

detection. People narrower than the set width will be ignored.

Set entrance direction and sensitivity.

Click

Apply

to save the settings.

Alert

The NVR reports an alert when an event occurs in the system. The

following are some alerts and their definitions in the system.

Storage Error

: Storage such as recording or snapshot failed.

Disk Offline

: A disk is not properly connected or is damaged

Disk Abnormal

: A disk can be detected but cannot be accessed.

Illegal Access

: A failed login attempt for a username that does not

exist or a password that is incorrect.

Network Disconnected

: Network connection is lost.

IP Conflict

: Devices on the network use the same IP address.

Perform the following steps to configure an alert:

Click

Alarm

Alert

Select an alert type, select the desired actions, and then select the

camera(s) for which you want to enable alarm output.

Содержание Admiral Line
























































































































Результаты поиска

Содержание Admiral Line

Отзывы:

SCW Admiral Line, Руководство по эксплуатации программного обеспечения, Страница: 74 / 119

Результаты поиска

Содержание Admiral Line

Отзывы: