SCW Admiral Line Скачать руководство пользователя страница 39

Страница: 39 / 119

Button

Description

Use 3D positioning.

Turn on/off the heater.

Turn on/off the function to remove snow.

Turn on/off PTZ shortcut operations.

Note:

Check that the 3D positioning, heater and
snow removal functions are supported by the
camera before using.

Use 3D positioning to zoom in or out.
Dragging from top down zooms in. Dragging
the other way zooms out.

Preset button.

Save the current position and status of the
camera as a preset.

Call a preset so the PTZ camera goes to the
preset position.

Note:

Before you select a preset number, check

whether a preset has been configured for this
preset number. Otherwise, the new preset will
replace the current one.

Preset patrol and recorded patrol. For detailed
information, see

Setting a Preset Patrol

and

Setting

a Recorded Patrol

Start or stop patrol.

Setting and Calling a Preset

A preset position (preset for short), is a saved view used to quickly steer

the PTZ camera to a specific position. A preset consists of the following

settings: pan and tilt positions, zoom, focus, and iris.

Access the

PTZ Management

window. For the detailed steps, see

PTZ Control Window and PTZ Management Window

Содержание Admiral Line
























































































































Результаты поиска

Содержание Admiral Line

Отзывы:

SCW Admiral Line, Руководство по эксплуатации программного обеспечения, Страница: 39 / 119

Результаты поиска

Содержание Admiral Line

Отзывы: