Scout Boats 420 LXF, Руководство пользователя

Страница: 143 / 202

143
Interior Equipment
conditioning pump and cleaning the sea strainers.
You also should refer to the air conditioner owner’s
manual for additional operating and maintenance
instructions.
Notice:
Air conditioners use seawater as a cooling
medium. The boat must be in the water
and the raw water supply system must be
properly activated prior to use. Operation
without proper cooling could cause the air
conditioning unit to automatically power
down and could result in system damage.
Always check for proper water flow out of
the air conditioning pump discharge thru-
hull when the air conditioner is operating..
12.4 Cabin Woodwork
Floors and Steps
The wood cabin floor is made of simulated wood.
The steps are made of teak or maple. The step
is finished with a high quality urethane finish that
will provide years of protection with proper care
and treatment. It is important to avoid tracking
sand and dirt on the cabin floor and step. Sand
and dirt acts like sand paper and will eventually
sand off the finish in the traffic areas. The wood
step can be sanded and refinished as necessary.
Use caution when varnishing wood steps. The
wood grain is a natural nonskid and too much
varnish or polyurethane will fill the grain and
make the wood slippery. You should use a satin
or flat varnish and only apply one or two coats.
A nonskid material mixed with the varnish may
be required to keep cabin steps from becoming
slippery when they are refinished.
The synthetic wood floors can be vacuumed then
washed with a mixture of water and household
cleaner. Wipe the floor dry with a clean towel.
Walls, Cabinets and Trim
The hardwood used for the cabinet trim moldings
is finished with a high quality urethane varnish.
The galley cabinets are made of a laminated,
simulated wood that requires no maintenance.
The walls and molding can be routinely cleaned
with a damp cloth. For heavy duty cleaning, use
a mixture of water and Murphy’s Oil Soap or white
vinegar and water to clean the wood or laminate
and wipe it dry with a clean towel. Apply a fur-
niture polish to add luster and help to preserve
the finish.
Simulated Wood Cabin Floor
Cabin Steps
https://www.boat-manuals.com/