background image

Page 9 
 

2.

 

For your safety 

 

The device complies with the following European directives: 

 

Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) 

 

Electromagnetic compatibility (EMC) 

 

The device corresponds to state-of-the-art technology. However, it is still associate with a number of residual 
hazards. 

 

These hazards can be avoided through strict observance of our safety information. 

 

2.1

 

Proper use 

 

 

Sensor for online moisture measurement of paper and cardboard 

 

For paper and cardboard with a grammage of 300 to 2000 g/m² 

 

For paper and cardboard with a temperature of 0 to + 100 °C 

 

2.2

 

Improper use 

 

 

The device should not be used in ATEX areas. 

 

Corrugated board cannot be measured. 

 

Papers and cardboard that have been carbon (graphite) blackened. 

 

Papers and cardboard with metallic coatings. 

 

In an environment with a temperature below 0 or above + 70 °C. 

 

2.3

 

User qualifications 

 

The device should only be handled by persons who are expected to carry out the work reliably. Persons whose 
reactions are influenced, by drugs, alcohol or medication, are not permitted to use the device. 

 

Persons who use this device must have read and understood the user manual and follow its instructions 
 

2.4

 

General safety information 

 

Follow the safety instructions below to avoid personal injury and material damage: 

 

If you notice loose parts or damage on the device contact your distributor. 

 

All of the device’s technical features have been inspected and tested before delivery. Every de

vice has a serial 

number. Do not remove the tag with the serial number. 

 

2.5

 

Warranty 

 

Not covered by warranty: 

 

Damages caused by non-observance of the user manual 

 

Damages caused by third-party intervention 

 

Products that have been used improperly or modified without authorization 

 

Damages caused by force majeure, natural disasters, etc. 

 

Damages due to improper cleaning 

 

 

Содержание HM-14560
























Отзывы: