scigiene HM-14560, Руководство пользователя

Страница: 10 / 23

Page 10
3. First steps
3.1 Unpacking the device
•
Unpack the device.
•
Next, make sure that it is not damaged and that no parts are missing.
•
DO NOT remove the transport protection from the device.
3.2 Checking the delivery content
Use the following list to check if the delivery is complete:
•
MF-S-HTD Paper moisture sensor with installed material temperature sensor and material guide
roller set
•
connection cable for power supply (1.9 meters) with 5-pole plug
•
user manual
•
transport protection
Options:
•
Modbus TCP interface
•
Analog output
•
PC-Software MF-S-HTD SenseWare - Software for moisture calculation, type calibration,
measured value display and measured data management (only possible in connection with
Modbus TCP interface!)
•
Power supply Power over Ethernet (PoE) (Only possible in connection with Mod- bus TCP
interface!)
3.3 Installation instructions
Please follow these instructions:
•
The installation position has to be chosen so that the sensor does not condense when
operating. Be careful if installing in a cool environment, where the paper or cardboard is very
warm!
•
Avoid strong mechanical impacts or loads.
•
Do not install the device near strong electromagnetic radiations.
•
Ensure that the paper lies on the paper guide rollers of the MF-S-HTD sensor during operation.
•
The sensor must always be installed above the paper web.
•
Do not place any objects under the sensor! There must be a free space of 300 mm!