scigiene HM-14560, Руководство пользователя

Страница: 11 / 23

Page 11
3.4 Mechanical installation
ATTENTION
Sensitive sensor plate
The white sensor surface consists of a thin ceramic plate. This can be destroyed
by mechanical pressure!
► When installing the sensor, remove the provided transport protection as
late as possible!
The MF-S-HTD sensor has to be fastened with the mounting plate to the machine. For this, different
holes are placed on the mounting plate. Use four screws (M8 or M6) to attach the sensor to the
machine.
The sensor can also be installed on a linear guide.
» Please ensure that the sensor has to be mounted always
above the paper web and that there must be a free space of
300 mm below the sensor!
1. The sensor has to be installed in such a position, that
the two paper guide rollers always touch the paper
web (image 1).
» For this, the sensor must be tightened against the paper web.
2. For an easier installation, the mounting plate can also
be completely unscrewed from the MF-S- HTD sensor
(image 2).
» Therefore, the four lowest M8 nuts have to be released
(image 3).
i
Installation height of the sensor
Ensure the correct installation height of the sensor.
If the paper guide rollers do not always touch the paper web, incorrect
measurements will occur.