Schwing SC30, Оригинальное руководство пользователя

Страница: 40 / 48

5.2-40
005.050.01-EN
16.4 DISPOSAL
– Old batteries must be disposed of properly
by returning them to a waste collection cen-
ter.
Do not dispose of rechargeable batteries to-
gether with household waste.
17. PAIRING TRANSMITTER AND RECEIVER
Pairing in our case means the programming of
an individual identification code (ID code). This
code is required to enable wireless communica-
tion between a specific transmitter and a specif-
ic receiver.
WARNING
Risk of malfunction:
Only specially trained persons are
allowed to program the radio con-
trol system.
Sequence of operations:
1. Remove the battery cassette from the trans-
mitter and connect receiver and transmitter
with the link cable.
2. Unlock the EMERGENCY STOP button on
the transmitter.
3. Switch the receiver off and then on again
by pulling out cable connector 8 (Fig. 1)
and by plugging it in again.
4a. Press and maintain button 5 (Fig. 2) on the
transmitter until the built-in buzzer sounds
(press for about 10 seconds).
Fig. 1
Fig. 2