Schwing SC30, Оригинальное руководство пользователя

Страница: 20 / 48

5.2-20
005.050.01-EN
10. THE CHECKBACK SYSTEM
The check back function of the G3 radio control
system serves the purpose of indicating current
machine data on the transmitter display.
Important information from the VECTOR control
can thus be made available to the operator stand-
ing at a distance from the machine.
The display is installed in the transmitter panel
(Fig. 1).
The transmitter is moreover equipped with a
beeper which draws the operator's attention to
certain machine conditions or faults. See the
description of the VECTOR control.
10.1 DISPLAY BACKLIGHTING
Pushbutton S 10 (Fig. 2) can be
used for activating the display
backlighting function for 30 sec-
onds.
If the light is switched on three times in succes-
sion within a short time, the system activates a
"forced pause" of one minute to avoid unnec-
essary battery discharge.
10.2 DISPLAY OF CHECKBACK DATA
Basic screen
If the transmitter is put into operation while the
receiver is on, the first screen displayed is the
basic screen (Fig. 3). The basic screen is sub-
divided into several display sections. See next
page.
Fig. 1
Fig. 2
Fig. 3