Handling, Servicing & Maint.
Pilot's Flight Manual
7-16
Reissued:
16 Jan 2019
por tion of fil ter, the fil ter is ser vice able. If no light is vis i ble, re -
place the el e ment.
Use soft cloth to re move for eign ma te rial from in side in duc tion air
fil ter hous ing cover as sem bly.
Vi sually in spect the ple num cham ber, by pass valve, and as so ci ated
com po nents.
Hold cover as sem bly level and po si tion fil ter el e ment on seal in -
side cover. Po si tion fil ter el e ment against gas ket on up per sur face
of in duc tion ple num cham ber.
CAU TION
IF FIL TER IS NOT IN PROPER PO SI TION, UN -
FIL TERED AIR MAY ENTER PLE NUM CHAM -
BER, CAUSING DAM AGE TO AIR IN DUC TION
SYS TEM AND ENGINE. USE EX TREME CARE
WHEN IN STALLING FIL TER AND COVER.
In stall wash ers and pin se cur ing in duc tion cover as sem bly and fil -
ter.
Check that by pass valve at top of air fil ter is seated.
7-15. TAIL ROTOR PEDAL - AD JUST MENT
Using var i ous thick ness shims, elim i nate ex ces sive play in ped als by
shim ming be tween top of pedal and re tain ing pin as re quired.
7-16. GROUND HAN DLING WHEELS
Two types of ground han dling wheels are avail able for the he li cop -
ter.
Ground Han dling Wheels Con fig ured For Stow age on Right Side
Land ing Gear Sta bi lizer (Step).
These wheel as sem blies are stowed on the right side of the he li cop ter in
brack ets lo cated on the top side of the land ing gear sta bi lizer (step). The
shafts of the wheel as sem blies are in serted into the in board side of the
This Document contains technical data subject to EAR. See WARNING and classifications on first page.
SCHWEIZER
Model 269C Helicopter
CSP Book 1 CSP-C-1.indd 170
8/4/19 12:46 PM
Содержание S300C 269C
Страница 19: ...CSP Book 1 CSP C 1 indd 19 8 4 19 12 45 PM ...