Schwank ThermoControl Plus 4M, Руководство по эксплуатации и установке

Страница: 3 / 33

- 3 -
1 Introduction
The Schwank ThermoControl Plus 4M is suitable for the control of single or two-stage /
modulation gas-infrared heating systems.
Depending
on
the selected operation mode, the controller has 4 to 8 heating zones.
Please read this manual carefully before installing or using the control unit. Failure to follow the
manual
and warnings will affect your
warranty
. They are also a prerequisite for a professional
installation and correct handling.
Please pay special attention to chapter 2 „Safety“.
The ThermoControl Plus 4M is designed to be used for industrial/commercial building heating
systems
.
Schwank will not be held responsible for any damages whatsoever resulting from incorrect use.
The controller measures the room temperature and switches the heater on/off by relays.
The controller features different operating programs.
P1…P5:
S
ingle
-stage, T
wo-stage
and Modulating
heaters
.
Daytime heating period extension +h
Available as a special feature is the extension of the programmed heating period by a manually
operated button. This button can be installed parallel to the sensor. By pushing the button
(~1 sec.), the value of the programmed daytime
temperature in the selected heating zone is
maintained for an additional time period. (Default is 1h, adjustable in the parameter menu)
Programmed temperature values and operating programs
The temperatures and operating programs of every single heating zone are independently
selectable.
- Daytime-
, night time- or frost protection temperature , selected by a weekly
schedule
- Continuous daytime ( FIX ) night time, ( FIX ) or frost protection temperature ( FIX ).
-
Vacation
program: the controller is able to save eight
vacation
periods, which are programmed
according to the calendar.
Other Features:
– Four air-proving contact inputs
– Four 2-10V modulation outputs
– Illuminated display
– Selectable ºF / ºC
temperature display
– Button for
system check
mode
– Real-time clock with calendar, including automatic su
m
mmer- / winter time correction
– Outdoor temperature sensor (OAS)
– Heat-up optimization: the heater starts/switches on earlier to ensure that the desired
temperature is achieved exactly at the programmed time.
– Remote
acess control
– Working-hour/time-counter at every relay output
– Error-relay: relay switches on in any case of error