Schwank ThermoControl Plus 4M, Руководство по эксплуатации и установке

Страница: 14 / 33

- 14 -
4.5
Vacation
program
The controller gives you the opportunity to program 8
vacation
periods. Beginning and ending of
the
vacation
is displayed with exact data (year, month, day). The programs can be changed or
stopped anytime.
During the
vacation
program the frost protection temperature
will be maintained.
To program the holiday periods, push the
button.
At first the number of the
vacation
program HOL 1
(vacation
1) appears. The number above t
he
vacation
number shows which program is activated. A programmed
vacation
period
starts
automatically at the programmed date. With the SEL button you are able to start or stop the
programmed
vacation
period. If the program is switched off (program number does not appear) it
won’t start, a running program would be shut down respectively. By using +/- you are able to
choose one of the 8 holiday programs.
. If a
The
vacation
program starts in all heating zones, which are working in automatic mode
zone is working on a fixed mode (FIX), the
vacation
program has no effect there.
If you push the button again, the start of the holiday
period can be modified( A ): by pressing
+/-
you can set
the year, month and day.
The holiday program starts at 0.00 o’clock on the
desired date.
After you have modified the start ( A ), you will have to
set up the end ( B ) of the holiday period. To fix the date
please use the
+/-
button. The completed program
ends at 0.00 o’clock on programmed day.
Press button to finish programming, the display
switches back to HOL.1. Now you can select the next
vacation
program and start its modification,
otherwise you can get back to the default screen by p
ushing the DISP button.
It is possible, that the ERR symbol appears, while you
are programming the holidays:
- if start date A is later than the programmed end of the
vacation
period B
- if the end of the period B is earlier than the present
date.
A program, that indicates one of these problems,
would
n’t start.
If all errors are eliminated the ERR –symbol
disappears.