Schwank ThermoControl Plus 4M, Руководство по эксплуатации и установке

Страница: 7 / 33

- 7 -
4.1.2 Selection of a heating zone
4.1.3 Turning the selected zone on/off
If you want to stop heating a certain zone, push the button. The symbol will sign the
off-state of the zone. Measurement and display of zone temperature still works in a zone that is
turned off. You can turn the zone on again by pushing the
button.
4.1.4 Special information on the default screen
The screen content, and adjustable
parameters belong to the selected
heating zone. The zone can be
selected by pushing the
ZONE
button. After pushing the button, all
settings of the heating zone can be
adjusted and set.
During the optimized heat-up period, you will notice the
OPT symbol. The starting time of a specific zone is
determined by an algorithm. This way the controller
automaticaly adapts to environmental specifics like outdoor
temperature, heat-up performance, and possible structural
changes in the heating zone. The feature can only be
deactivated in the setup-menu. An OAS outdoor
temperature sensor is required for this feature.
While using the
vacation-
mode the
sign
will be marked.
To stop or modify the
vacation
program, please push the
button (chapter 4.5).
Option: After pushing the override button the day time
mode starts for a preset, adjustable time (0:00-24:00h;
default is 1h). At the same time the
+h symbol will be
marked. This operation can be stopped by using the
FIX
button.
Night time mode has been selected remotely (
?
)
. All
three operation modes (
4 21
) are possible, just like
in case of FIXed modes.