Schwank ThermoControl Plus 4M, Руководство по эксплуатации и установке

Страница: 18 / 33

- 18 -
Minimal operation time of the heater. ( 0...15 min)
Exhaust fan follow-up-time :
After the heating zones have been switched off, the exhaust
fan continues to run for a preset time. From 0 up to 60
minutes can be programmed (it appears only in the ”AUto”
ventilation mode).
The Heat-up optimization can be switched on (AUto) or
off (OFF). The effective warm up time is shown.
Automatic switch from summer time
to wintertime (+/- 1h).
This function can be activated (AUto)
and deactivated (OFF).
If a communication module is integrated into the controller, other parameters will follow.
’OFF’: the exhaust fan is switched off (also the symbol
doesn’t appear).
’AUto’: exhaust fan and air-proving contact in use.
Programmable time for the override button +h
(0:00-24:00)
The illumination of the display can be
programmed: 1…9 minutes, switched
on (ON) or switched off (OFF).
Feature selection of the contact input
no. 72-73:
: remote contact
RES-ERR: signal input - Error