2 Safety
EN BEF 400RC floor milling machine with remote control
BEF400RC‐en‐221018
7
Risk of injury due to high temperature at the milling motor,
drive elements and milling rotor. These parts may still be
hot after operation.
Do not operate the machine in areas where there is risk of
explosion or near flammable materials.
Risk of injury from moving machine components. Limbs
and clothing can be drawn in.
Risk of injury from parts expelled during milling and during
cutting.
The surface to be milled must be free of obstacles, soiling
and loose objects that can be expelled during milling.
Risk of injury from the accumulation of dust during milling
work.
The machine may only be operated with an appropriate
dust extraction system (
!
Chapter 5.6, page 19)!
There is a risk of injury when working with hazardous mate
rials (e.g. asbestos).
Eating, drinking and smoking are prohibited at the work
place in these cases. The corresponding national and in
ternational laws and regulations must be complied with.
Hydraulic oil is hazardous to the environment and must not
get into the groundwater.
The function and safety of the machine can only be ensu
red if the necessary inspections, maintenance and repair
work are carried out.
If any defects are found on the machine that could
endanger people or damage property, stop the machine
immediately and ensure that it cannot be used again until
all repairs are completed (
!
Chapter 5.7, page 24).
The operating and maintenance personnel responsible for
the machine must ensure that no one can enter the ma
chine's danger zone during operation or maintenance work.
Adding to or modifying the machine in any way that could
compromise operating safety is prohibited.
It is prohibited to transport persons with the machine.
The machine must not be used as a tractor.
Troubleshooting may be carried out by trained technicians
only.
