1 Important notes
EN BEF 400RC floor milling machine with remote control
BEF400RC‐en‐221018
4
1 Important notes
1.1 Liability and warranty
Liability or warranty is excluded in the following cases:
— The notes or instructions in the operating manual were not observed.
— The machine or its equipment were improperly operated.
— Maintenance was carried out inadequately or incorrectly.
— The specified genuine spare parts were not used.
— The protective equipment was not used, was modified or was removed.
— Spare parts or wearing parts were installed or used,
which have explicitly not been approved by Schwamborn Gerätebau GmbH.
— The specified connection values and ambient conditions were not observed.
— An unsuitable dust extraction has been used.
If the product described here is modified without the consent of
the manufacturer, then said manufacturer is not responsible for
any damage that may be incurred. Any such action will void the
warranty.
1.2 Intended use
The machine may only be used with the accessories supplied by
the manufacturer for milling out or cutting:
— Concrete
— Coatings
— Levelling compound
— Balancing compound
— (Road) marks
— Slots
— Asphalt
Any other usage of the machine can lead to dangerous si
tuations and is prohibited.
GG"
Risk of damage due to dirt deposits.
Checks must be carried out at short intervals.
To ensure the intended use of the machine, follow the instruc
tions in the operating manual, paying particular attention to any
warnings and instructions relating to operation, cleaning and
maintenance.
Before using the milling machine, the operating
personnel must have carefully read and un
derstand this operating manual.
Always keep this operating manual close at hand
for reference.
The documents and operating manuals of the suppliers (milling
motor etc.) must be read and complied with.
If the machine is on loan to other persons, the operating manual
needs to be provided with the machine and its importance must
be made clear.
