SCHUNK GSM-P 32, Сборка и руководство по эксплуатации

Страница: 20 / 60

Assembly
20 11.00 | GSM-P | Assembly and Operating Manual | en | 389104
1. Check the evenness of the mounting surface, Mechanical
connection [
}
21].
2. Only open the required air connections (main connection or
direct connection), Pneumatic connections [
}
23].
3. Connect the product via the hose-free direct connection.
✓
Use O-rings from the accessory pack.
✓
Seal main air connections which are not required with
locking screws.
4. OR: Connect compressed air lines to the main air
connections "A" and "B".
✓
Screw in air connections (plug connections).
OR: Screw on throttle valve in order to be able to perform
sufficient throttling and/or damping.
5. Screw the product to the machine/system, Mechanical
connection [
}
21].
✓
If necessary, use appropriate connection elements (adapter
plates).
✓
Observe the maximal tightening torque, admissible screw-in
depth and, if necessary, strength class.
✓
When mounting from the rear or at the side: use cylindrical
pins for fixing the product in place.
6. Secure the gripper fingers to the base jaws, Mechanical
connection [
}
21].
✓
Use centering sleeves from the enclosed accessory pack.
7. Connect air purge connection if necessary.
8. Connect the sensor, see assembly and operating manual of the
sensor.
9. Mount the sensor, Mounting the sensor [
}
24].