Maintenance
44
11.00 | GSM-P | Assembly and Operating Manual | en | 389104
8.6.1 Changing the gripping module – GSM-P 32
Disassembling
1. Remove all compressed air lines.
2. Loosen and remove both screws (1).
3. Remove gripping module (2) from socket (4).
4. Remove O-ring (3) from groove of socket (4) and discard.
before
05/2019
GSM-P year of
manufacture
as of
05/2019
Assembling
Clean all parts thoroughly and check for damage and wear. When
assembling, use the parts from the spare part package. Grease all
parts using supplied brush and lubricant.
GSM-P manufactured before 05/2019:
Assembly position is not marked on the socket.
1. Insert new O-ring (3) into groove of socket (4).
2. Insert gripping module (2) into socket (4) and align so that the
dot marking of the gripping module points to the middle of the
semicircular side of the socket.
3. Using new screws (1) from the spare parts package, screw the
gripping module (2) firmly onto the socket (4).
Note: Observe max. tightening torque!
4. Secure all compressed air lines.
Содержание GSM-P 32
Страница 59: ......
