SCHUNK EVG 55 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 60

SCHUNK EVG 55 Скачать руководство пользователя страница 20

Basic safety notes

20

05.01|EVG 55|en

Notes on particular risks

DANGER

Danger from electric voltage!

Touching live parts may result in death.

• Switch off the power supply before any assembly, adjustment or

maintenance work and secure against being switched on again.

•  Only qualified electricians should perform electrical installations.
•  Check if de-energized, ground it and hot-wire.
•  Cover live parts.

DANGER

Risk of fatal injury from suspended loads!

Falling loads can cause serious injuries and even death.

• Stand clear of suspended loads and do not step within their

swiveling range.

•  Never move loads without supervision.
•  Do not leave suspended loads unattended.
•  Wear suitable protective equipment.

WARNING

Risk of injury from objects falling and being ejected!

Falling and ejected objects during operation can lead to serious inju-

ry or death.

• The danger zone must be cordoned off by a protective barrier.

2.14

«
...
18
19
20
21
22
...
»

Содержание EVG 55





























































Отзывы:

Нет отзывов