SCHUNK EGS 25, Сборка и руководство по эксплуатации

Страница: 9 / 56

Basic safety notes
2.4 Gripper fingers
Requirements of gripper fingers
Accumulated energy can make the product unsafe and risk the
danger of serious injuries and considerable material damage.
• Execute the gripper fingers in such a way that the product
reaches either the "open" or "closed" position in a de-energized
state.
• Only change gripper fingers if no residual energy can be
released.
• Make sure that the product and the top jaws are a sufficient
size for the application.
2.5 Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
See also Link Daten Umgebungs- und Einsatzbedingungen.
• Make sure that the product and the top jaws are a sufficient
size for the application.
• Ensure that maintenance and lubrication intervals are
observed,
}
7 [
/
45] .
2.5.1 Electromagnetic compatibility
The product meets the requirements of the EMC act of the inner-
European market, among other requirements. The product has
passed the EMC test as per the following standards:
Standard Title
EN 61000-6-2
(2006) EMC: Generic standard – Interference immunity
in industrial environments
EN 61000-6-3
(2011) EMC: Generic standards - emitted interference
for living area, business and commercial areas
and small businesses
The product must be installed using interference-free cables and in
a way that meets EMC requirements in order to ensure
interference-free operation.
9 05.00 | EGS | Assembly and Operating Manual | en | 389746