Assembly and settings
30
05.00 | EGS | Assembly and Operating Manual | en | 389746
5 Assembly and settings
5.1 Installing and connecting
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
CAUTION
Risk of damage to the electronics!
If pressure is exerted on the rotary switch while the gripping
force is being set, the product can be damaged.
•
Use a suitable slot screwdriver with a 1.5 - 2 mm blade.
•
Exert no axial pressure on the axis of the "Gripping force"
rotary switch.
CAUTION
Damage due to incorrect speed setting!
If the product approaches the end position too hard, it may be
damaged.
•
Set the speed so that the product travels without impact into
the end position.
NOTE
Ensure sufficient heat dissipation via the customer's mounting
surface.
Mount the product so that sufficient cooling is guaranteed.
The size of the cooling surface depends on the application. Avoid
exposure to additional heat e.g. caused by attachments or by the
attached axle.
A temperature malfunction may occur if the product reaches
excessively high temperatures.
NOTE
In temperature-critical applications, for instance in a park
position, axles not required can be switched off by setting PIN2
and PIN4 to logical "low." This can cause the product temperature
to reduce.
