Schmalz FMHD, Инструкция по эксплуатации

Страница: 15 / 60

30.30.01.01648/06 www.schmalz.com EN | 15
C Connection Pieces for External Vacuum Generator
The system can be operated using a blower or a pump. The system is usually connected to the external
vacuum generator using a suitable vacuum hose, which can be attached at the connection piece using
a hose clamp.
D Main Body FMHD
The main body consists of a length-adjustable extrusion-molded aluminum section. Configurable vac-
uum area grippers have a length between 350 mm and 3,500 mm. On the underside of the section there
is a glued-in sealing gasket on the right and left. The sealing may only protrude slightly over the section,
but it must also be at least flush with the section. Together with the sealing on the end covers, this is
how the “valve chamber” is sealed.
E Sliding Blocks
The t-slots are used for flexible mechanical attachment of the gripper using the sliding blocks. Suitable
attachment kits are listed in the “Accessories” section. The quick-release clamps are fastened to the
side t-slots using sliding blocks. Additional sensors can also be attached to the side t-slots.
B Separating cylinder assembly unit
2.1 Mounting plate
2.2 Screws for mounting the plate
2.3 Compact cylinder
2.4 Screws for mounting the cylinder
2.5 Sealing plate
2.6 Sealing plate sealing
2.7 Mounting plate sealing
2.8 Plug-in screw union (compressed air connection)
2.9 Quick exhaust valve (ensure that they are properly connected)
2.10 Y piece (exhaust)
2.11 Exhaust connection
2.12 Exhaust (filter)
Note the direction
of the quick-change
valve.
2.5
2.1
2.2
2.3
2.6
2.7
2.8 2.9
2.4 2.12
2.11
2.10