4 | EN
www.schmalz.com
30.30.01.01839/03
WARNING
Failure to comply with the general safety instructions
Personal injuries and damage to the system
►
These operating instructions are specific to the items included in delivery from
Schmalz. These operating instructions do not take into account any modifications
to the system made by the customer.
►
Use only the connections, mounting holes and attachment materials that have
been provided.
►
Carry out mounting or removal only when the device is in a voltage-free and de-
pressurized state.
►
General safety regulations, European standards and VDE guidelines must be ob-
served and complied with.
►
The gripper is to be used in combination with an automated handling system (gan-
try/robot). For this reason, you must also follow the safety regulations of the corre-
sponding system.
►
Animals are not permitted to sit or stand in the transport area.
►
Transporting persons or animals is prohibited!
►
It is not permitted to make changes to system components.
►
The system may only be operated with the operating voltages specified for the
corresponding components.
►
Make sure that the workplace and surroundings are kept clean.
►
Protect the components from damage of any kind.
►
Compressed air or a vacuum could cause closed containers to explode or im-
plode. Check the products before use.
►
Do not apply suction to any dangerous dusts, oil mists, vapors, aerosols, etc.
►
Only use suitable and approved vacuum filters.
►
Do not look into the exhaust air flow of the vacuum generator.
Non-compliance with work safety instructions
Personal injuries and damage to the system
►
Never lift loads at an angle and never drag them.
►
Do not tear off stuck loads.
►
Only pick up and lift suitable loads (check inherent stability and surface density).
►
Only set workpieces down on clear, even surfaces due to the danger of slipping.
►
Do not release the load until it rests completely and safely on a secure surface.
►
Do not come close to the load when releasing/depositing it and do not touch it.
