schmalenberger fluvo CG700 rondo, Руководство по эксплуатации

Страница: 17 / 32

OPERATING INSTRUCTIONS
17
CG700 rondo
Version: 27202 - D
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
4.14.1 Face plate assembly installation / Concrete-tile pool
4.14.2 Face plate assembly installation / Concrete-liner pool
After connecting the air button, put on the face plate assembly (35/35.1), this allows the
pressure connection and air connection to slide into one another (refer to fig. 24). Fasten
to the clamp ring (72) with the screws (90).
fig. 25
C Mounting protection film
20 Housing
21 Switching tube
35/35.1 Face plate assembly
90 Screw
Remove the mounting protection film (C).
After connecting the air button, put on the
face plate assembly (35/35.1), this allows
the pressure connection and air
connection to slide into one another.
Fasten to the housing (20) with the
screws (90.1).
Warning!
Make sure that there is not a kink in the
switching tube (21), do not lay it in a loop
and do not shorten it!
fig. 26
C Mounting protection film
20 Housing
21 Switching tube
35/35.1 Face plate assembly
39 Clamp gasket
72 Clamp ring
74 Screw
90 Screw
Remove the mounting protection film (C).
Place the clamp gasket (39) between the
installation housing (20) and the liner and
screw the clamp ring (72) to the
installation housing using the screws
(74). The sealing contact faces must be
clean and smooth. Now cut out the pool
liner.
Warning!
Make sure that there is not a kink in the switching tube (21), do not lay it in a
loop and do not shorten it!
8460
8461