schmalenberger fluvo CG700 rondo, Руководство по эксплуатации

Страница: 22 / 32

OPERATING INSTRUCTIONS
2 2
CG700 rondo
Version: 27202 - D
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
• Detaching the massage set
Switch off the counter-current swimming system prior to detaching the impulse-massage
nozzle.
Press the hose coupling (F) against the sliding sleeve (V), take a hold of it and pull it back,
pull out the hose coupling.
7 Fault Assistance
The functional faults listed in the table are the most frequent causes of defects. If the
corrective measures described are not successful, then the specialist that is called in
individual cases will have to investigate the cause of the fault.
fig. 34: Attaching the massage set fig. 35: Detaching the massage set
D Nozzle
F Hose coupling
V Sliding sleeve
Warning!
In accordance with UVV (Accident Prevention Regulations) all repairs and
intervention to the unit must be carried out exclusively by qualified persons
otherwise damage (accidents) could result to the user / operator.
Functional fault Possible cause Remedy
1. Pump runs very loudly and lacks
performance Motor rotating in the wrong direction Re-pole the motor in the terminal box
and reverse the direction
Motor blower brushes against the
blower cover Fasten the blower cover properly
2. Pump starts up heavily and slowly A current phase is missing Check supplies and fuses
8323 8324