Schlage KING COBRA-2 KC5196-2-R, Руководство по установке

Страница: 19 / 28

KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
57040-E Page 19 04-2007
30) Align the Interface:
31) Secure the Interface:
a
b
Photo on right shows a RHR installation.
•
Viewed from the inside of the door, this is what the
interface should look like within the door when
assembling a RHR installation.
> Observe that hook on interface (
a ) is on the right
side of the latch mechanism’s “finger” ( b ).
•
Center the interface and position it
flush with surface of door.
•
Tighten the set screw ( a ) in latch mechanism to secure
the interface within the latch mechanism.
•
Verify that the other set screw ( b ) in latch mechanism
(closest to inside of door) is fully tightened.
•
Verify that both latch mechanism mounting screws
(top and bottom of latch mechanism) are fully tight-
ened.
NOTE: You may find it beneficial to hold the interface steady
while you tighten the set screw.
a b