![Schlage KING COBRA-2 KC5196-2-R Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/schlage/king-cobra-2-kc5196-2-r/king-cobra-2-kc5196-2-r_installation-manual_1212432015.webp)
KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
57040-E Page 15 04-2007
21) Install New Retaining Ring-LHR:
If you are installing a KC9111/KC9111-2, continue with,
Install the Lever: on page 15.
Other-
wise, skip to,
What To Do With the Adams Rite® Product: on page 16.
22) Install the Lever:
23) Install the Lever Cover:
•
Photo on right shows an interface that will be used in
a LHR installation. Observe direction of “finger” (
a
)
on hook assembly.
•
Push new retaining ring (included in screw pack)
back onto pin.
a
•
Determine correct orientation for door and lock hand and slide lever
onto shaft accordingly.
NOTE: A RHR installation is shown in the photo on the right.
•
Using a 5/64” hex wrench, tighten the set screw.
IMPORTANT: After set screw has been completely tightened, top of set
screw should be at or a little bit below surface of lever. If not, check to
insure that lever is pushed completely over shaft.
•
Place lever cover onto inside of lever.
Содержание KING COBRA-2 KC5196-2-R
Страница 26: ...KC9111 KC9111 2 KC9321 KC9321 2 INSTALLATION Dimensions 57040 E Page 26 04 2007 Dimensions Dimensions ...
Страница 27: ...KC9111 KC9111 2 KC9321 KC9321 2 INSTALLATION NOTES 57040 E Page 27 04 2007 NOTES NOTES ...
Страница 28: ...KC9111 KC9111 2 KC9321 KC9321 2 INSTALLATION NOTES 57040 E Page 28 04 2007 NOTES ...