Schlage KING COBRA-2 KC5196-2-R, Руководство по установке

Страница: 9 / 28

KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
57040-E Page 9 04-2007
8) Alignment of Interchangeable Cores:
9) Tighten the Four Screws in the Baseplate:
10) The Dead Latch’s “Critical Edge:”
•
If an IC Core is used, center the interface toward the
bottom.
•
Tighten the four baseplate screws in the fol-
lowing order:
> Tighten
a and b until snug.
> Tighten c and d until snug.
> Fully tighten a and b .
> Fully tighten c and d .
> Check all four screws to make sure that
all four are completely tight.
b
c
a
d
•
For clarity purposes only, photo on the
right is a view of deadlatch with escutch-
eon removed.
•
Edge ( a ) is referred to as the dead latch’s
“ critical edge . ”
IMPORTANT: In the next step, the “critical
edge” on deadlatch will have to be lined up with
hole (b) in baseplate. See
Position the Dead
Latch’s Set Screw Hole: on page 10
a
b