Scarlett SC-146, Инструкция по эксплуатации

Страница: 5 / 28

www.scarlett-europe.com SC-146 5
·
Turn Speeds control switch at position.
·
Press and retain the Pulse button - food processor will operate till this button is pressed.
·
HOW TO OPERATE
·
Before processing cut a food so it would pass through a feeder easily.
·
Turn control switch to speed (low speed) or II (high speed), so food processor will work continuously until you turn back to "0" (switch off a
speed).
CAUTION: Use the pusher (I) only to feed products, push it evenly and gently. The heavier pressure, the coarser chopping.
CAUTION: Do not operate continuously longer than 1 minutes with less than 2 minute intermission .
·
Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute.
·
Do not remove any parts during the operating.
BLENDER (pic.7)
·
Leave the processor bowl at the place locked into the slot. Do not start with any accessories or place food in the processor bowl.
·
Open the safety cap by pressing down the safety lid lock.
·
Place the blender jug onto the blender gear. Make sure it properly fitted.
·
Put ingredients into blender jar, and close it with the lid.
·
Insert beaker into the lid and then put the lid onto the blender jug. Make sure all parts securely fitted.
·
Plug-in, turn the switch/press buttons to recommended speed:
(low speed) for liquid ingredients mainly.
II (high speed) for heavier processing, i.e. liquid and solid ingredients mixtures.
The appliance will operate until it will be switched off.
- PULSE mode.
CAUTIONS:
·
Avoid operating the empty blender;
·
Never place hot ingredients into blender jar (> 70 ºC);
·
Ingredients must be cut into small pieces before processing in blender jar;
·
Never fill blender jar with a liquid over maximum level marked;
·
When processing is finished, switch off, and then unplug the appliance and wait the motor will stop before removing a food and
attachments.
CLEANING AND CARE
·
Switch off and unplug the appliance.
·
Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm sudsy water after each use. Dry all
accessories with a clean soft cloth.
·
Wipe housing with a damp cloth.
·
Do not use scouring pads, abrasive and harsh detergents.
CLEANING THE BLENDER JUG
·
Place empty blender jug onto the motor unit and cover with the lid.
·
Leave empty processor bowl at the place with the lid locked into the slot. Do not run with any accessories or food inside.
·
Pour a little warm soapy water into the blender jug, and switch on AUTO CLEAN mode for a few seconds.
·
Remove the blender jug; rinse it under running water and dry.
CLEANING THE PROCESSOR BOWL
·
Remove the accessories and take off the processor bowl.
·
Pour on bowl with warm water, add some cleaner and activate AUTO CLEAN mode a few times.
·
Repeat this operation if necessary.
·
DO NOT IMMERSE THE MOTOR UNIT IN ANY LIQUID OR IN A DISHWASHER.
CAUTION: The blades are extremely sharp and therefore dangerous. Handle with caution!
STORAGE
·
Be sure that the appliance is unplugged.
·
Complete all requirements of Chapter CLEANING AND CARE.
·
Keep the appliance in a dry clean place.
RUS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13. 14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
(P)
·
, , ,
.
·
.
.
·
.
·
, .
·
, .
·
.
·
.
·
, .
·
.
·
. .
·
, .
·
, .
·
.
·
.