9
GB
INSTRUCTION MANUAL
There is flour on the bread
•
You used too much flour, or too little liquid.
•
Check the recipe and measure the right quantity of flour
with the scales or the right quantity of liquid with the
measuring cup supplied with the breadmaker.
Bread was mixed badly
•
You did not put the kneading blade into the baking pan.
•
Before adding the ingredients, make sure that the
kneading blade is in the pan.
•
There was a power failure or the breadmaker stopped
during the baking process.
•
The breadmaker will switch off if it is interrupted for
more than ten minutes.
•
You may have to restart the breadmaker, but it may lead
to a negative result if kneading has already started.
The display shows HHH after starting the program
•
It means that the temperature in the breadmaker is too
low. Stop the program, unplug the breadmaker out the
power outlet, open the lid and let the breadmaker cool,
before continuing the program.
The display shows LLL after starting the program
•
It means that the temperature in the breadmaker is too
high. Move the breadmaker to a warmer room.
The display shows EE0/ EE1 after starting the
breadmaker
•
There was a power failure, error in the temperature
sensor operation. Contact the Service Centre.
CLEANING AND CARE
•
Clean the breadmaker regularly and remove any food
remains from its surface.
•
Before cleaning, switch the breadmaker off and plug it
out a power outlet.
•
Let the breadmaker cool completely.
•
Wipe the control panel, outside and inside surfaces, the
baking pan with a wet cloth and detergent.
•
Do not use aggressive agents or abrasives.
STORAGE
•
Make sure that the breadmaker is plugged out of the
power outlet and cooled completely.
•
Follow the requirements of the CLEANING AND
MAINTENANCE section.
•
Store the breadmaker with the lid half open in a dry
clean place.
Содержание INDIGO IS-525
Страница 1: ......
