ScanSoft OMNIPAGE DIRECT, Руководство по установке

Страница: 48 / 54

Installation Problems
46 Technical Information
You receive garbage or nothing when you attempt text recognition
AND when you select Partial Page you see vertical lines running
through the document image or no image at all.
The memory address for your scanner interface card is probably
interfering with the memory address for your video display adaptor. Use
the instructions in your scanner owner's manual to move the scanner
interface card to a different memory address.
An autoexec.bat file does not exist on the root directory of your
boot drive.
If SETUP, the Direct installation program, does not see a SET TEMP
variable, it will look for your autoexec.bat file on the C drive to add one.
When SETUP cannot find an autoexec.bat file on the C drive, an error
message will appear. If your boot drive is a different drive, such as A:, add
the following statement to your autoexec.bat file:
SET TEMP =
X:\TEMPDIR
where
X
is the drive where your temporary directory exists
and
TEMPDIR
is the name of your temporary directory.
If you do not have an autoexec.bat file on your boot drive, you must create
one. Refer to your DOS Operations Manual and your Windows User's
Guide for information on creating an appropriate autoexec.bat file. Once
created, add a
SET TEMP
statement to your autoexec.bat file.
Direct crashes when you try to scan text into Word for Windows
2.0 or WordPerfect.
You may have to modify the settings.ini text file in your Direct directory.
See “Using WordPerfect” on page 5.