ScanSoft OMNIPAGE DIRECT, Руководство по установке

Страница: 28 / 54

Scan Text
26 Commands and Settings
These parameters are usually included at the end of the
DEVICE=YOUR_SCANNER
entry in your config.sys file.
If you have a TWAIN-compliant scanner and a TWAIN data source dialog
box appears when you use Direct, you must make sure that the settings in
the TWAIN dialog box match those in the Direct Options dialog box.
For example, if you select Auto Intensity in the Direct Options dialog box,
you must have Grayscale selected in the TWAIN dialog. The Size: area
setting in the Direct Options dialog must be as large or larger than the
scanning area setting in the TWAIN dialog. And, the resolution setting in
the TWAIN dialog must be 300dpi.
For more information about using TWAIN-compliant scanners, see
“TWAIN Scanners Not Listed” on page 41
Scan Text
Click this to open the Scan Text dialog box. Click Scan to start a scan or the
Options button to adjust recognition settings.The Brightness slide appears
if Auto Intensity is deselected in the Options dialog box.