Scanivalve MPS4232, Руководство по аппаратному и программному обеспечению

Страница: 64 / 96

58
MPS4232
Section 5: Software
UDP Variables
The UDP settings control the target and enable of scan data out the UDP port.
List UDP Settings (LIST UDP)
DESCRIPTION Returns all of the UDP settings
SYNTAX LIST UDP
RETURNS All of the setting followed by the prompt.
EXAMPLE
LIST UDP
SET ENUDP 0
SET IPUDP 224.0.1.2
>
Set UDP Enable (ENUDP)
COMMAND ENUDP
TYPE Set/Get
DESCRIPTION Configures UDP data output.
SYNTAX SET ENUDP <0 or 1>
Where:
0 = Disabled
1 = Enabled
RETURNS Prompt when ready to accept a new command
EXAMPLE
SET ENUDP 1
>
DEFAULT 0
RANGE 0 or 1
NOTES SET FORMAT F B must be set for the MPS to send Binary data via UDP.
Set the UDP Target Address and Port (IPUDP)
COMMAND IPUDP
TYPE Set/Get
DESCRIPTION Sets the UDP data output target address and port.
SYNTAX SET IPUDP <udpadd> <port>
Where:
<udpadd> = Is the target IP address for the UDP scan data.
<port> = Is the target port.
RETURNS Prompt when ready to accept a new command
EXAMPLE SET IPUDP 224.0.1.2 23
>
DEFAULT 0.0.0.0 0
RANGE <Any valid IP address> <0-65535>