Scanivalve MPS4232, Руководство по аппаратному и программному обеспечению

Страница: 50 / 96

44
MPS4232
Section 5: Software
Read Model
COMMAND MODEL
TYPE Get
DESCRIPTION Returns the set model name and number.
SYNTAX
GET MODEL
RETURNS The model name of the device
EXAMPLE GET MODEL
MPS4232
>
NOTES This variable is set at the factory and cannot be changed in the field.
Scan
COMMAND SCAN
TYPE Function
DESCRIPTION Commands the MPS to being sampling values from the internal sensors and outputs data to the
designated target. The MPS will enter SCAN mode.
SYNTAX SCAN
RETURNS The scan data, followed by a prompt when the scan is completed.
EXAMPLE SCAN
::: [Scan Data] :::
>
NOTES Output is based on formatting. Please see MPS Data Output Definitions for more information.
NOTES If PTP is enabled, the MPS may used PTP time as a trigger to start scanning if configured to do so.
NOTES If TRIG == 1, the MPS will enter SCAN mode but will not output data until a trigger is received. See
the TRIG command for more information.